MKS Monster 8 Intro

Read in Github>>>

1. Related Tutorials

 

2. Download

klipper firmware >>>

marlin firmware for voron >>>

hardware >>>

stl >>>

tool >>>

3. User Manual

Monster8 V1.0 manual >>>
Monster8 V2.0 manual >>>

4. Firmware

1) Support Marlin 2.0.x
2) Support Klipper
3) Update firmware

  • DFU upload
  • TF card update
  • Udisk update

5. Compare Between Monster V1.0 & Monster V2.0

6. Hardware

  • MCU is STM32F407VET6, 168MHz, 512K flash, 192KB RAM
  • DC12-24V input(2 MP1584EN Output DC12V(For FANs) and DC5V)
  • 4 heaters + 4 temps interface(H-BED,HE0,HE1,HE2; TB, TH0,TH1,TH2)
  • 3 PWM FANs + 3 power output(all power can be select by jumper and select VIN, dc12V, dc5V)
  • 8 axis drivers and 9 motor interface(Driver0,1,2-1,2-2,3,4,5,6,7)
  • EXP1,EXP2 support MKS MINI12864,MKS TS35,LCD12864,LCD2004
  • USART(usart1:PA9,PA10) support MKS H43 or for other serial communication
  • 6 endstop support power select(X-,X+,Y-,Y+,Z-,Z+) and 3D TOUCH(PA8) interface
  • 4K eeprom on board(connect to I2C)
  • Built-in CAN transceiver and interface(connect to CAN)
  • Integrated SPI communication microsd card and reserved SPI signal interface
  • Integrated UDISK
  • Integrated virtural USB device
  • Support TMC UART and SPI mode, SENSORLESS_HOMING function(Diag0-5,connect to X-,Y-,Z-,X+,Y+,Z+)
  • Support driver power select(5V or 3.3V)
  • Has TVS power spike protection
  • Possess power reverse connection protection function
  • Support DFU mode set by button(Boot0)